| Brand: | Haitronic |
| Product Code: | HS1981 |
| Availability: | 9999 |
HS1981 US-52 220V speed control panel 6W 15W 25W 40W 60W 90W 120W 140W 180W 200W 250W 300W 400W
Feature:
· The speed control range of governor is 90-1400r/min and 90-1700r/min respectively at 50/60Hz.
· The controller is manufactured with high quality electronic components, and its performance is stable and reliable.
· The control accuracy is high and the micro-control of speed is realized.
· The operation of the product is simple, which enables novices to learn and master the operation method quickly.
· Widely used in packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line as speed drive device.
Specification:
Product model: US-52
Matching power: 300W; 400W; 500W (Optional)
Working power supply: AC220V 50/60HZ (Voltage fluctuation range ±10% Ue)
Use environment: -10~+50℃
Relative humidity: <90%
Speed range: 90-1400r/min 50HZ, 90-1700r/min 60HZ
Package list:
1 * Speed Controller
Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
Installation and usage method:
· The controller has 6 lines, the black line is the main line of the , the red and white are the capacitor secondary lines, the two blue lines are the speed feedback line, and the green line is the ground line.
· Turn off the power, connect according to the wiring diagram and confirm that the line connection is correct, do not arbitrarily modify it;
· Set the external speed knob to "0" before use to avoid transient high currents and damage the controller.
· This product is controlled by generator feedback voltage, and the control line is divided into two lines: "blue" and "yellow".
· When the governor is connected to the and found that the torque or speed does not meet the requirements, the US-52 adjusts the side trimmer potentiometer (speed setting adjustment).
· To change the direction of operation, simply replace the jumper "CCW" and "CW" on the wiring on the back of the controller.
* When changing direction, you must change the after it has completely stopped running.
1) Select COM and CW short circuit, then the rotates clockwise;
2) Select COM and CCW to short, then the rotates counterclockwise.
· The action switch only controls the to operate or stop, and does not use the power supply for interruption. If it is not used for a long time, please turn off the power.
