| Brand: | Haitronic |
| Product Code: | HS3613 |
| Availability: | 99999 |
HS3613 DC 12V Single Key Bond Bistable Relay Module Car Modification Switch Start Stop Self-Locking
Note: One-key two-state relay module, the power supply will be burned when the positive and negative connections are reversed, and there is no power reverse protection
Low level control: it is a trigger signal when the signal line touches the ground
Please allow 1-3CM differs due to manual measurement.
Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
Description:
1. The power supply can choose 5V
2. By pressing the button on the board, or an external button to make the relay module pull in or off, click the pull in, and then press off, the button is triggered at a low level. The relay is off when the power is turned on again.
3. The secondary secondary output end bears a current of less than 10A, which means that the operating current of the controlled circuit or device cannot exceed 10A, and it is connected to the normally open or normally closed end according to its own needs.
4. The welding position of the external pull-in indicator is reserved, and there is also a welded pull-in indicator on the board
5. Module size: length x width x height = 52.8mm x 32mm x 18mm
