Currency - $  
HS5321 Gray Module Digital Photoelectric Line-finding Photosensitive Patrol Line Color Recognition Single Gray Sensor Tracking Module

HS5321 Gray Module Digital Photoelectric Line-finding Photosensitive Patrol Line Color Recognition Single Gray Sensor Tracking Module

Brand:Haitronic
Product Code:HS5321
Availability:99999

Available Options

* Color:

Qty:     - OR -   Add to Wish List Add to Compare

HS5321 Gray Module Digital Photoelectric Line-finding Photosensitive Patrol Line Color Recognition Single Gray Sensor Tracking Module

Product Instructions:

1, The grayscale line hunting sensor is mainly used for the line hunting trolley.
2, The product has high sensitivity and strong anti-interference ability, and ordinary lighting basically has no effect on it. Use 2 grayscale sensors with strong anti-interference, the light source adopts high-brightness concentrating LED, and the receiving tube compares the intensity of different reflected light, as long as the intensity of light reflection is different, the greater the difference, the better the discrimination ability, much stronger anti-interference ability than ordinary infrared sensors.
It can recognize green and white, black and white, blue and white, red and green, which are common in smart car line-finding competitions, and the effect is very good; it can also recognize other colors whose gray values differ by a certain value.
Detection distance (the distance from the bottom of the probe to the ground): 10-50mm (below 5mm is the blind area), 10-25mm is recommended.
3, With LED signal indicator light, the corresponding probe illuminates a higher gray value, the output level changes from high to low, and the corresponding LED lights up.
4, Digital signal output: 1 or 0 output, simple programming control; adjust the signal sensitivity according to the site light and other conditions.
5, Sensor adjustment method: generally place it on a lighter color, turn the potentiometer clockwise to the end, and then slowly turn it back counterclockwise until the signal light is on, then move the sensor probe horizontally to the darker color area and the corresponding signal light of the sensor is off. As long as the two colors can be recognized to output different signals.

Product parameter details:

1, Power supply voltage: 5V DC
2, Working current: white light 11mA, red light 13mA; (various working environments have fluctuations)
3, Signal indication: 1 way LED indicator light
4, Interface form: KF2510 3P anti-reverse socket, 2.54 pitch pin header
5, Detection distance: 10mm~50mm (recommended height is 15~25mm)
6, Product size: 41mm×16mm (length×width)
7, Signal output: active low output (sensing white low level, black high level)

Write a review



Note: HTML is not translated!

Bad           Good