HS5465 BMS 6S 24V Lithium ion 80A Common Port Battery protection module

BULLET POINTS:

1. Charge, Discharge Protection Current, Voltage range are permanently programmed inside BMS and cannot be changed.  This is a 6S fixed configuration BMS.  It cannot be used for any other battery pack configuration. This BMS also cannot be used for LiFePo4, Li-Metal or LTO batteries. It is strictly for Li-Ion battery packs only.
2. Box contains: Rated voltage 24V BMS, balance sense cable (7 Wire sense cable with connector) and instruction sheet.
3. Battery pack will stop charging when voltage reaches 4.25V and stop discharging when voltage reaches 3.0Vof a cell .
4. Temperature range of this BMS is from -20℃ to as high up to 70℃
5. It is used for any lithium battery applications including solar, RV, Electric bikes, Skate board, camping, Boat, Power tools, Lawn moving and household energy storage systems
6. USA seller with fastest delivery.

DESCRIPTION:

This is a DALY common port BMS for Li-Ion batteries. If you need bluetooth BMS, please go to smart bms link in our store. Battery pack strings must be matched with BMS strings. DALY BMS passed waterproof test, humidity and resistance test. DALY BMS can be used in home power storage system, RV Power supply, E-bike and other lithium battery related device.

DESCRIPTION	SPECIFICATION
BATTERY TYPE	Li-Ion
Continue discharge current	80A
Sparkle current	240A±40A
main circuit inner resistance	≤ 20mΩ
Charge Voltage	S*4.25V
Charge Current	40A
Over charge detect  voltage	4.25 ± 0.05V
Over charge protection  delay	1 Sec
over charge release voltage	4.15 ± 0.05V
Balance detect voltage	4.18V
Balance release voltage	4.18V
Balance current	30± 5mA
Over discharge detect voltage	2.7 ± 0.1V
Over discharge detect delay	1 Sec
Over discharge release voltage	3.0 ± 1.0V
Over current detect voltage	1 mS
Over current detect delay	OFF LOAD
Short circuit protection condition	Short circuit external load
Short circuit detect delay	250µS
Short circuit protection  relay condition	Off load
Temp protection	Charge  <-5  ͦ or >50  ͦ   discharge < 70  ͦ
working current	100µA
Sleeping current (when in discharge)	20µA
Working temp range	-20   ̴ 70 ͦc
Sleeping temp range	-40   ̴ 80 ͦc
Weight	1 Pound
Size	9.5*6.5*2.5 inches
Box	BMS  7 wire sense cable with connector

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: