HS0543 CC2530 ZIGBEE Wireless Module

HS0543 CC2530 ZIGBEE Wireless Module  

XL2530-D01 Wireless Module 

1. Transmit power 2.5mW (4dBm).

2. Receiver sensitivity-97dBm (BER = 10-2) .

3. The opening band, without application frequency, carrier frequency 2.4GHz.

4. High noise immunity and low error rate.

5. Air transfer rates of up to 250kbps. 

6. Range of visibility, the reliable transmission distance up to 100 meters (PCB antenna), but also by IPEX interface to an external high gain antenna module that determines the distance from the antenna gain, the gain is doubled in size, distance doubled. 

7. The range of visibility, the reliable transmission distance up to 100 meters (PCB antenna), but also by IPEX interface external high-gain antenna on the module that determines the distance from the antenna gain, the gain doubled in size, distance doubled.

8. Provides 16 channels, automatically selects the reliable channel of communication depending on the environment.

9. Power consumption: Receiving current ≤ 27mA, emission current ≤ 40mA.

10. Small size, light weight. 

11. Using SoC, peripheral circuits, high reliability, and low failure rate.

12. Provides PCB board antenna, under normal circumstances can not matched antenna. Also provides an external antenna plug. 

13. Adapted to 2.4GHz IEEE 802.15.4 and ZigBee protocol applications, automatic network.

  

Applications

     Family of intelligent control of industrial wireless remote meter reading, remote sensing, automated data acquisition system security, alarm hotel room equipment, wireless monitoring, access control systems, personnel location of traffic, street lighting control, logistics, active RFID, POS systems, wireless handsets

  

Integrated Performance 8051

·       Strong DMA channel 5

·       256KB in-system programmable flash memory, can be customized 32k, 64k, 256kB

·       8KB RAM

·       Hardware support CSMA/CA is

·       AES security coprocessor

·       Battery monitoring and temperature sensor function

·       8-channel 12-bit ADC

·       2-channel UART

·       IEEE 802.15.4 MAC timer, general-purpose timers (one 16 and two 8)

·       32 kHz sleep timer capture

·       Watchdog Timer

·       21 General Purpose I/O pins (19*4 mA, 2*20 mA)

·       Support online debugging

 

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: