HS1878 OV2640 2 million pixels Camera Module STM32F4 driver support JPEG
Standard camera lens focal length 3.6mm, can choose other upscale megapixels lens.
3V3 ----- input supply voltage (use 3.3,5V also available, but not recommended)
GDN ----- ground
SIO_C --- SCCB control the clock interface (Note: Some low-level microcontroller requires a pull-control, and I2C interface similar)
SIO_D --- SCCB serial data input (output) interface terminal (Note: Some low-level microcontroller requires a pull-control, and I2C interface similar)
VSYNC --- frame synchronization signal (output signal)
HREF ---- horizontal synchronizing signal (output signal)
PCLK ---- pixel clock (output signal)
XCLCK --- clock signal (input signal)
D0-D7 --- Data Port (output signal)
RESTE --- reset port (normal use pulled)
PWDN ---- power selection mode (normal use low)
Photoreceptor array format UXGA 1632x1232 maximum
IO voltage of 1.7V-3.3V analog voltage 2.5-3.0v (internal LDO for nuclear power 1.2V)
Power operation TBD Sleep <20μA
Operating temperature -30 C to 70 C
Stable 0 C to 50 C
Output format (8) YUV / YCbCr4: 2: 2 RGB565 / 555/444 GRB4: 2: 2 Raw RGB Data
Optical Size 4 "
FOV 25 °
The maximum rate of 15fps SXGA Chen
Sensitivity 1.3V / (Lux-sec)
SNR 40 dB
50 dB dynamic range
Browse Mode Progressive
Electronic exposure a line to the 1247 lines
2.2μm x 2.2μm pixel area
Dark current 15mV / s at 60 C