Currency - $  
HS5724 Waveshare 128×32, 2.23inch OLED display HAT for Raspberry Pi

HS5724 Waveshare 128×32, 2.23inch OLED display HAT for Raspberry Pi

Brand:Waveshare
Product Code:HS5724
Availability:999999
Qty:     - OR -   Add to Wish List Add to Compare

HS5724 Waveshare 128×32, 2.23inch OLED display HAT for Raspberry Pi

Overview

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

Trying to add a control interface for your Pi? This compact display would be the ideal choice.

Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Optional interfaces: SPI (default), or I2C, configured via onboard resistor
  • Brings control pins for host boards like Arduino/STM32
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Driver: SSD1305
  • Interface: SPI / I2C
  • Display size: 2.23inch diagonal
  • Display color: white
  • Resolution: 128×32
  • Viewing angle: >160°
  • Power supply voltage: 3.3V/5V
  • Logic level: 3.3V

 

Interface

SYMBOL RASPBERRY PI PIN (BCM) DESCRIPTION
VCC 3V3/5V Power input
GND GND Ground
DIN MOSI SPI data input
CLK SCLK SPI clock input
CS CE0 Chip selection, low active
DC P24 Data/Command selection (high for data, low for command)
RST P25 Reset, low active

Write a review



Note: HTML is not translated!

Bad           Good