HS6421 Multifunctional voltage tester DC120-2700V constant voltage constant current diode triode MOS tube voltage test
Battery capacity:3.7V 600mAH
Charging port:TYPE-C
input:5V 1A
Charging current:Max.550mA
output voltage :120-2700V
Output current:0.2-3.8mA
Applicable components: MOS transistor/IGBT/transistor/diode/electrolytic capacitor/LED/MOV/one-way thyristor/rectifier bridge
Test objective: Breakdown voltage of electronic components
Attention:
1. Do not use it to test high voltage electrolytic capacitors such as 450V/220UF. It is possible to test low voltage capacitors such as 2200UF/35V.
If there is no output voltage when the red high-voltage start button is pressed, it is likely that the lithium battery voltage is lower than 3.1V, and the tester cannot be powered on, and it needs to be charged in time.
3. The output current can be adjusted to the maximum value only when testing LED and voltage regulator diodes. For testing other components, the output current can be adjusted to the minimum value to avoid damaging the parts
Packing and list:
Carton packaging
Standard: Host *1+ manual *1+ marker *1
High configuration: Host *1+ manual *1+ marker *1+LCR test clip *1